Corrosion Resistant Coatings
Protective coatings engineered to defend metal surfaces, equipment, and structural components from moisture, chemicals, and corrosion.
Rust Avoid®
Direct-to-metal rust-inhibitive coating for ferrous metal surfaces in commercial and light industrial environments. Corrosion protection for structural steel, equipment, and building components.
HP1100 Acrylic Metal Primer
Water-reducible rust-inhibitive primer for steel, iron, and non-ferrous metal. Excellent adhesion on hard-to-coat surfaces for light to moderate industrial exposures. LEED® v4 eligible. Suitable for USDA-inspected facilities.
HP1320 Universal Metal Primer
Single-component alkyd primer for ferrous metal with fast 30-minute dry time. Corrosion protection that accepts most topcoats. Suitable for USDA-inspected facilities.
HP1550 Concrete & Metal Epoxy Primer
Two-component penetrating epoxy sealer for concrete and rusted steel. Low-viscosity formula penetrates and reinforces rusty steel, seals masonry. 100% solids. Suitable for USDA-inspected facilities.
HP1750 Waterborne Bonding Primer
Single-component rust-inhibitive primer bonding to a wide range of metals and glossy surfaces. Accepts alkyds, acrylics, epoxies, and urethanes as topcoats. LEED® v4 eligible. Suitable for USDA-inspected facilities.
HP2200/2210/2220 Alkyd Urethane Enamel
Surface-tolerant urethane alkyd enamel adhering to marginally prepared metal surfaces. UV stable, abrasion and impact resistant, protects against atmospheric corrosion. Apply direct to ferrous metal or over HP primers. Suitable for USDA-inspected facilities.
HP4000 Polyamide Epoxy
Multi-use two-component epoxy for machinery, floors, structural steel, and walls in severe commercial exposures. Chemical and solvent resistant, cross-linked for toughness, suitable for immersion. Suitable for USDA-inspected facilities.
HP4600 Epoxy Mastic — Semi-Gloss
High-solids surface-tolerant two-component epoxy mastic for metals, concrete, and masonry. Long-term rust prevention and chemical resistance for floors, secondary containment, and immersion applications. Suitable for USDA-inspected facilities.
HP5000/5010 Aliphatic Urethane
Multi-use two-component non-yellowing urethane for metal and masonry. Outstanding UV protection, high chemical and abrasion resistance. Also used as a non-sacrificial anti-graffiti coating. Suitable for USDA-inspected facilities.
HP5700/5720 DTM Mastic Urethane
Two-component direct-to-metal urethane for protecting metal surfaces including tightly adhered rust. Excellent gloss and color retention, outstanding UV protection, abrasion and corrosion resistant. Suitable for USDA-inspected facilities.
