Primer
Industrial primers that maximize adhesion, corrosion protection, and long-term coating performance on steel, concrete, and prepared surfaces.
Fresh Start® Alkyd Primer
Oil-based primer for challenging surfaces with bleed-through, tannin staining, or existing oil-based coatings. Delivers superior adhesion where waterborne primers fall short.
Lead Block™
Encapsulant coating that seals and stabilizes lead-based paint, reducing exposure risk without full removal. Commonly specified for commercial renovation in older Detroit-area buildings where lead paint is present.
HP1100 Acrylic Metal Primer
Water-reducible rust-inhibitive primer for steel, iron, and non-ferrous metal. Excellent adhesion on hard-to-coat surfaces for light to moderate industrial exposures. LEED® v4 eligible. Suitable for USDA-inspected facilities.
HP1270 Acrylic Sealer/Finish
Fast-drying waterborne clear sealer for bare concrete floors and masonry. Reduces water penetration and prevents efflorescence without altering surface appearance. Recoat in 2 hours. Suitable for USDA-inspected facilities.
HP1320 Universal Metal Primer
Single-component alkyd primer for ferrous metal with fast 30-minute dry time. Corrosion protection that accepts most topcoats. Suitable for USDA-inspected facilities.
HP1420 Shop Primer
Single-component alkyd primer for ferrous metal with fast 30-minute dry time. Corrosion protection that accepts most topcoats. Suitable for USDA-inspected facilities.
HP1550 Concrete & Metal Epoxy Primer
Two-component penetrating epoxy sealer for concrete and rusted steel. Low-viscosity formula penetrates and reinforces rusty steel, seals masonry. 100% solids. Suitable for USDA-inspected facilities.
HP1560 Quick Set Epoxy Floor Sealer
Two-component fast-dry epoxy sealer — primer or base coat for high-performance floor systems. Can also be used as a standalone semi-gloss floor finish. Recoat in 5 hours. Moisture tolerant. Suitable for USDA-inspected facilities.
HP1750 Waterborne Bonding Primer
Single-component rust-inhibitive primer bonding to a wide range of metals and glossy surfaces. Accepts alkyds, acrylics, epoxies, and urethanes as topcoats. LEED® v4 eligible. Suitable for USDA-inspected facilities.